[Elphel-support] Elphel 353 / 359 stereo camera problem

[Oleg]

The attached file worked for me. Set phase value to 44. See line 364:

> ...

        echo "Sensor was successfully initialized at ".date("F j, Y, g:i
> a")." from $configPath page $page\n";
> /// Currently - only for eyesis
>        sync2master();
>        *elphel_set_P_value(ELPHEL_MULTI_PHASE_SDRAM, 44,
> elphel_get_frame());*
>       }

...


On Tue, Jun 23, 2020 at 10:20 AM Simon Vogl <office at voxel.at> wrote:

> Hm, indirectly yes - I cross-tested with another 353 cam heads (with its
> own fpc) and different mux boards. The mux boards in question consistently
> fail.
>
> Will start testing your proposals tomorrow morning!
>
> Meanwhile I've asked your sales about replacement boards as we urgently
> need a solution
>
> Thanks very much for your quick responses - really appreciated!
>
> Simon
> Am 23.06.20 um 18:03 schrieb Oleg:
>
> Have you tried swapping the cable between the mux board and the system
> board?
>
> On Tue, Jun 23, 2020 at 10:01 AM Oleg <support-list at support.elphel.com>
> wrote:
>
>> Hi,
>>
>> MULTI_PHASE_SDRAM is indeed not stored in any firmware. Instead it's
>> remeasured every boot by the driver (drivers/elphel/multisensor.c)--
>>
> [...]
>
> Best regards,
> Oleg Dzhimiev
> Electronics Engineer
> phone: +1 801 783 5555 x124
> Elphel, Inc.
>
> --
> VoXel Interaction Design  |  www.voxel.at
> DI Dr.techn. Simon Vogl   |  simon at voxel.at
> Tomaschekweg 46           |  +43 650 2323 555
> A-4040 Linz - Austria     |
> Office address: Industriezeile 35, 4020 Linz (2nd floor)
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>


-- 
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20200623/7149557d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: autocampars.php
Type: application/x-php
Size: 121415 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20200623/7149557d/attachment-0001.bin>