[Elphel-support] 10393 for 3 KAI11002 at 4.8 fps(30mhz)

[Yakov]

Hello Andrey. How many 10393 CPU boards I need to run 3 KAI11002 at
4.8 fps at 30mhz?

Regards,
Iakov(Yakov) Petrov.

On Mon, Aug 24, 2015 at 11:24 PM, support-list
<support-list at support.elphel.com> wrote:
> Hello Yakov,
>
> The 10393 boards (main boards of the NC393 cameras) are hardware-compatible
> with the older sensor boards. The new system board has 4 identical ports
> each with the pinout compatible with 10313, 10333 and 10353 boards. The new
> camera will also support modern serial sensor interfaces, but the bakward
> compatibility will be 100% preserved - with the flexibility of FPGA it is
> not that difficult.
>
> I just finished simulation of the camera FPGA (comparing against 10353 with
> the same sensor data) and now I'm starting to test it on the actual hardware
>
>
> Andrey
>
> Hello. Will NC393 boards will be backward compatible with 323 hardware?
>
> Best regards,
> Yakov Petrov.
>