[Elphel-support] Issue with nc353l-369

[Oleg]

Hi Riccardo,

1. Try the following:

a. Boot into live usb
b. Launch a terminal window (konsole)
c. Power on the camera - if it's erased it will be in the netboot mode, if
not - then bring it to this mode.
d. In terminal:
netboot -cmd *all* -kimg /nfs/8.2.16/kimage -nfs /nfs/8.2.16/ -mac
00:0E:64:08:1C:D0
(The image files are unpacked in /nfs/8.2.16/)
(Change 00:0E:64:08:1C:D0 to S/N printed on the bottom)
(if the camera is not in the netboot mode the script will pause after
several lines - if it is - it will run and the last line will be EXIT 0).

e. Change the PC's IP to "192.168.0.15" (must be 15):

> sudo ifconfig eth0 192.168.0.15


f. Wait until orange led goes off.
g. Power cycle, check serial output.

Worked for me.

2. About the problem
I was able to reproduce it. I tested the live usb a while ago - it was
working. Something must have changed  - need to investigate this.

Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20140715/1d70c1aa/attachment-0002.html>