[Elphel-support] LiveUSB kubuntu 10.04 -no ethernet driver, firmware upgrade problems
hoi quoc nguyen
nguyen_quoc_ut_hoi at yahoo.com
Thu Apr 18 09:32:16 PDT 2013
Oleg,
I just tried to re-download kubuntu-elphel-4.iso, and everything works properly!it seem that the first downloaded kubuntu-elphel-4.iso corrupted.Thanks!
--- On Tue, 4/16/13, Oleg <support-list at support.elphel.com> wrote:
From: Oleg <support-list at support.elphel.com>
Subject: Re: [Elphel-support] LiveUSB kubuntu 10.04 -no ethernet driver, firmware upgrade problems
To: "hoi quoc nguyen" <nguyen_quoc_ut_hoi at yahoo.com>
Cc: "elphel support-list" <support-list at support.elphel.com>
Date: Tuesday, April 16, 2013, 9:55 PM
Hello,
1 . when I build the live USB using “unetbootin-window” tools.
If I use ISO file “ kubuntu-elphel-3.iso” dowloaded from http://community.elphel.com/files/live-dvd/ it’s OK .
But if I use ISO file “kubuntu-elphel-4.iso” to create liveUSB, it will notify a message when booting “invalid or crashed kernel”.
Can I use kubuntu-elphel-3.iso to build software without any problems?
If I want to use kubunto-elphel-4.iso to build liveUSB ,how to fix this problem.
Do not have Windows at hand to test unetbootin. But just tried creating a live USB in kubuntu 11.10 with both: its built-in usb creator and unetbootin - it works.
You could try another program or burn the ISO image on a DVD disk.
At the same time you should not have any troubles with building software in kubuntu-elphel-3.iso.
2. in kubuntu-10.04 LTS environment built from kubuntu-elphel-3.iso
I can’t upgrade firmware using “search elphel camera” and “net Flash” either.
I noticed that is because the driver for on-board ethernet not installed
(I can asccess internet on win7, the same PC, it prove that the hardware is OK)
in terminal console, if I type “ifconfig” I can see only loopback interface, there was no eth0 interface. If I type lspci command I can see it can recognize the ethernet from “atheros” (it display atheros AR8151 on window)
I dowloaded the driver for onboard called “AR81Family-linux-v1.0.1.14.tar”
I did as follow:
tar -xzvf AR81Family-Linux-v1.0.1.9.tar.gz
cd scr
sudo su
make install
modprobe atl1e
exit
but still canot install driver ,it say “there are no kernel source”
I search google they said I need :
sudo apt-get install linux-headers-generic
sudo apt-get install build-essential
then I type : sudo apt-get install build-essential , it said something like “already install” .
but when I type : sudo apt-get install linux-headers-generic ,
it said something like “connecting to ubuntu server…”
actually, I’m trying to install ethernet driver -> I could not access internet to get update.
My question: could you show me how to install ethernet driver without connecting internet? If I can not install driver for onboard ethernet I can not upgrade firmware!
So, typing in terminal:
ifconfig eth0 192.168.0.15should be reporting: "No such device"
I cannot help you with installing linux drivers on you PC because I can't reproduce the problem. Could you try it on another PC.
Also, there's a way to update camera firmware from the camera, you will need:
1. new firmware image2. NFS (Network File System) server installed on PC
Then if you go http://<camera-ip> -> System Preferences -> Firmware - that page checks if NFS is available, contains a valid image and does an update.
A folder name example for image files:
/nfs/latest80/ Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20130418/fa96e461/attachment-0002.html>
More information about the Support-list
mailing list