[Elphel-support] binning modes, sum and average, how to change them?

[Oleg]

Dear Biel,

If 'elphel' in your address line is associated with the camera's IP address
then you could try to open the link in the browser first, then, like
Sebastian said, 'wget' in the terminal.

Browser:

> http://elphel/parsedit.php?embed=0.18&SENSOR_REGS32
> http://elphel/parsedit.php?embed=0.18&DCM_HOR&DCM_VERT&BIN_HOR&BIN_VERT


Terminal, like Sebastian said:

> wget http://elphel/parsedit.php?embed=0.18&SENSOR_REGS32
> wget
> http://elphel/parsedit.php?embed=0.18&DCM_HOR&DCM_VERT&BIN_HOR&BIN_VERT


Also, you can set the binning mode from the camera UI:
http://elphel (or your address) -> Camera Control Interface -> Click on the
camera icon -> 'more details' -> tab 5

Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.

On 12 October 2012 11:55, Biel Bestué de Luna <7318.tk at gmail.com> wrote:

> I'm with firmware: Elphel (R) Model 353 Camera release 8.2.8
>
> I'm trying to change between binning modes, and I'm using the information
> in the wiki <http://wiki.elphel.com/index.php?title=Binning> to change
> the Binning mode:
> http://*cameraIP*/parsedit.php?embed=0.18&SENSOR_REGS32 in my case
> *cameraIP* is "elphel" which is an alias for "192.168.1.9" that i have set
> up in my computer.
>
> When I'm connected to the camera, and I write this on the terminal the
> terminal responds with the following error message:
>
> ~$ http://elphel/parsedit.php?embed=0.18&SENSOR_REGS32
>
> [1] 2738
> bash: http://elphel/parsedit.php?embed=0.18: The file or directory
> doesn't exist
> SENSOR_REGS32: command not found
> [1]+  End of execution with state 127
> http://elphel/parsedit.php?embed=0.18
>
> I've searched SENSOR_REGS32 in the parameter editor but it isn't seem to
> be there, I couldn't find it! how do I change the binning mode?
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20121012/ed3ac3ee/attachment-0002.html>