[Elphel-support] binning modes, sum and average, how to change them?

[Biel Bestué de Luna]

oops! I'm completely stupid! thanks to point that out. -_-'

2012/10/12 Oleg <support-list at support.elphel.com>

> Dear Biel,
>
> If 'elphel' in your address line is associated with the camera's IP
> address then you could try to open the link in the browser first, then,
> like Sebastian said, 'wget' in the terminal.
>
> Browser:
>
>> http://elphel/parsedit.php?embed=0.18&SENSOR_REGS32
>> http://elphel/parsedit.php?embed=0.18&DCM_HOR&DCM_VERT&BIN_HOR&BIN_VERT
>
>
> Terminal, like Sebastian said:
>
>> wget http://elphel/parsedit.php?embed=0.18&SENSOR_REGS32
>> wget
>> http://elphel/parsedit.php?embed=0.18&DCM_HOR&DCM_VERT&BIN_HOR&BIN_VERT
>
>
> Also, you can set the binning mode from the camera UI:
> http://elphel (or your address) -> Camera Control Interface -> Click on
> the camera icon -> 'more details' -> tab 5
>
> Best regards,
> Oleg Dzhimiev
> Electronics Engineer
> phone: +1 801 783 5555 x124
> Elphel, Inc.
>
> On 12 October 2012 11:55, Biel Bestué de Luna <7318.tk at gmail.com> wrote:
>
>> I'm with firmware: Elphel (R) Model 353 Camera release 8.2.8
>>
>> I'm trying to change between binning modes, and I'm using the
>> information in the wiki <http://wiki.elphel.com/index.php?title=Binning>to change the Binning mode:
>> http://*cameraIP*/parsedit.php?embed=0.18&SENSOR_REGS32 in my case
>> *cameraIP* is "elphel" which is an alias for "192.168.1.9" that i have set
>> up in my computer.
>>
>> When I'm connected to the camera, and I write this on the terminal the
>> terminal responds with the following error message:
>>
>> ~$ http://elphel/parsedit.php?embed=0.18&SENSOR_REGS32
>>
>> [1] 2738
>> bash: http://elphel/parsedit.php?embed=0.18: The file or directory
>> doesn't exist
>> SENSOR_REGS32: command not found
>> [1]+  End of execution with state 127
>> http://elphel/parsedit.php?embed=0.18
>>
>> I've searched SENSOR_REGS32 in the parameter editor but it isn't seem to
>> be there, I couldn't find it! how do I change the binning mode?
>>
>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20121012/19680537/attachment-0002.html>