[Elphel-support] Elphel353
Andrey Filippov
support-list at support.elphel.com
Thu Sep 1 10:31:08 PDT 2011
Diana, for the video stream you may use MPlayer
mplayer rtsp://192.168.0.9
If the frame size is larger than the screen size, you may need to try
different video outputs, i.e. (assuming camera IP is default 192.168.0.9)
mplayer rtsp://192.168.0.9 -vo x11
More is on our wiki:
http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#Watch.2Frecord_video_stream_over_the_network
Andrey
On Thu, Sep 1, 2011 at 11:08 AM, Diana Carrigan
<DianaEJohnson at maxim-ic.com>wrote:
> We have our Elphel353 camera up and running. We would like to observe
> “video stream” without actually recording. What is the best way to do this?
> ****
>
> ** **
>
> Also, we are ordering 10353 System Development board. Does the board just
> connect to the existing camera? If so, thru which interface.****
>
> ** **
>
> Best Regards,****
>
> Diana Carrigan****
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110901/539b6e41/attachment-0002.html>
More information about the Support-list
mailing list