[Elphel-support] Elphel 333, strange colours

[Karl Hammar]

Andrey:
> How did the camera stop working?
> 
> The problem might be in the connectors on the 30-conductor flex cable
> between the camera system board and the sensor board - you may try to open
> the camera and reconnect the cable.

Good suggestion, I'll try that when I come by the camera, perhaps next
week.

> If that will not help - you may ship the
> camera to us, we should have some replacement boards even as we do not make
> the 333 model anymore.

About what would such a replacement cost, if it is in the vincinity of
a new camera we might consider a replacement instead.

> On Thu, Sep 15, 2011 at 7:32 AM, Karl Hammar <karl at aspodata.se> wrote:
> 
> >  Dear Sirs,
> > as attachment shows the colours are wrong. Is the camera beyound help,
> > or can I fix this in some ways?
> >
> > The system log (attached) don't seem to reveal any problems.
> >
> > Invoice no.: NC333-236
> > Date: 2006-10-16

Regards,
/Karl Hammar

-----------------------------------------------------------------------
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden
+46 173 140 57