[Elphel-support] 10338 board

[Andrey Filippov]

Adam,
http://wiki.elphel.com/images/7/71/10338d.pdf has the PCB layout, the
connector is on the pages showing LAYER-4 (BOTTOM SIDE), the layer is shown
as seen from top side.

On you image the pin 1 is on the bottom left side, pin 2 - on top left, pin
3 - second from the left on bottom, etc.
These pins do not include the for mounting pins (no electrical contact) that
are in the 4 corners of the connector:
X-2-4-6...30X
X1-3-5-7...29-X
"X" - mounting pin, no connection to the cable
"-" - space
"1".."30" - electrical pin

The cable (sensor end) when pointed sensor end up, looking at the contact
side will be numbered sequentially 1-2-3-...-29-30

On Tue, Mar 15, 2011 at 10:03 PM, Adam Gobi <adam.gobi at acheron.com.au>wrote:

> Thanks for your reply Andrey, but I couldn't see what you were referring
> too.  Instead, I've attached a picture to remove any potential ambiguousness
> from my original question of left, or right.
>
> Thanks,
> ag.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110316/c64f6af5/attachment-0002.html>