[Elphel-support] question about Video streamer control
李伟
rockindark at 163.com
Sun Jul 10 01:55:20 PDT 2011
Hi,
Thanks for reply. I have already tried the links, but the problems are still there.I reduced the resolution below 800*600, and try to see the video with the camvc, MPlayer and VLC. But all of them did not work.
I find that in the program setting option of the camvc, the stream Ip is blank. Could this be the reason? When I try to config the Stream ip in the "Streamer contols", there is a dialog box said that "These controls are not yet supported in the 8.0 software". My Sourcecode version is elphel353-8.0.8.41.
It seems the video streamer did not automatically start at boot time in the camera, how can I fix it?
Thanks for your help.
Wei Li
发件人: Sebastian Pichelhofer
发送时间: 2011-07-08 04:23:07
收件人: 李伟
抄送: support-list
主题: Re: [Elphel-support] question about Video streamer control
Hi Wei
The video streamer is automatically started at boot time in the camera.
Since most video players have trouble with 5 Megapixel video streams you should reduce the resolution in camvc by changing the WOI
If you want to view the live stream take a look at: http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#2._watch:_player_GUI_.2F_command_line
or record the video stream:
http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#3._record:_command_line
Regards Sebastian
2011/7/7 李伟 <rockindark at 163.com>
Hi,
I am a new beginner of Elphel NC353L. When I try to config the video streamer with camvc, there is a dialog box said that "These controls are not yet supported in the 8.0 software". My Sourcecode version is elphel353-8.0.8.41.
How can I see and save the video output of the camera into my laptop?
There is another question: how can I do to sync the GPS time from a GPS reciever with the video output of Elphel NC353L.
Wei
_______________________________________________
Support-list mailing list
Support-list at support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110710/d7c30877/attachment-0002.html>
More information about the Support-list
mailing list