[Elphel-support] question about Video streamer control

[Oleg]

Hi,

1. In a ssh/telnet session or http://192.168.0.9/phpshell.php. If you type
"top" to see a list of processes, will it show anything like:

835     1 root     S    44896 108%   0% /usr/local/bin/str
>

2. Also could you please send the output of the terminal command "mplayer
rtsp://192.168.0.9:554 -vo x11 -zoom" ?

Best regards,
Oleg

2011/7/10 李伟 <rockindark at 163.com>

> **
>  Hi,
>
> Thanks for reply. I have already tried the links, but the problems are
> still there.I reduced the resolution below 800*600, and try to see the video
> with the camvc, MPlayer and VLC. But all of them did not work.
>
>  I find that in the program setting option of the camvc, the stream Ip is
> blank. Could this be the reason? When I try to config the Stream ip in the
> "Streamer contols", there is a dialog box said that "These controls are not
> yet supported in the 8.0 software". My Sourcecode version is
> elphel353-8.0.8.41.
>
> It seems the video streamer did not automatically start at boot time in the
> camera, how can I fix it?
>
>  Thanks for your help.
>
> Wei Li
>
>
>  ------------------------------
>  *发件人：* Sebastian Pichelhofer
> *发送时间：* 2011-07-08  04:23:07
> *收件人：* 李伟
> *抄送：* support-list
> *主题：* Re: [Elphel-support] question about Video streamer control
>  Hi Wei
>
> The video streamer is automatically started at boot time in the camera.
>
> Since most video players have trouble with 5 Megapixel video streams you
> should reduce the resolution in camvc by changing the WOI
>
> If you want to view the live stream take a look at:
> http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#2._watch:_player_GUI_.2F_command_line
>
> or record the video stream:
>
> http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#3._record:_command_line
>
> Regards Sebastian
>
> 2011/7/7 李伟 <rockindark at 163.com>
>
>>  Hi,
>>  I am a new beginner of Elphel NC353L. When I try to config the video
>> streamer with camvc, there is a dialog box said that "These controls are not
>> yet supported in the 8.0 software". My Sourcecode version is
>> elphel353-8.0.8.41.
>>  How can I see and save the video output of the camera into my laptop?
>> There is another question: how can I do to sync the GPS time from a GPS
>> reciever with the video output of Elphel NC353L.
>>  Wei
>>
>>
>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110711/c3a3e107/attachment-0002.html>