[Elphel-support] how to increase the frame rate?

[Oleg K Dzhimiev]

>
> limiting the maximum exposure time if auto exposure is on


Unfortunately there's a bug in the Camera Control Interface - the field is
inactive.

So, go to Parameter Editor, check 'autoexposure' - then View/Edit Current
AUTOEXP_EXP_MAX (tips on mouse over) is the parameter you need in
microseconds.

setting exposure time manually


In the Camera Control Interface - click on the camera icon (and the icon
with an arrow and ?-mark). Below the preview window there are
exposure/gamma/gain/whitebalance controls. The icon with a 'white sun' is
exposure, analog gain is green.

Parameter for exposure is EXPOS, but you need to set AUTOEXP_EN to 0x0.

-- 
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20101118/f719d9b2/attachment-0002.html>