[Elphel-support] how to increase the frame rate?

[Ákos Maróy]

On 18/11/10 03:33, Andrey Filippov wrote:
> 3) increase the analog gain. The deafult value is 2.0 for the green,
> higher/lower for red and blue, depending on the color balance. When you
> increase the gain , the noise will go up, but not as fast as the gain
> itself, of course. Maximal gain is 15.75 for every color, if there is
> less say blue than green (it is usually the case) you can not put the
> green gain to the maximal value.

where / how would I increase this?