[Elphel-support] how to increase the frame rate?

[Andrey Filippov]

On Wed, Nov 17, 2010 at 10:07 AM, Oleg K Dzhimiev <oleg at elphel.com> wrote:

> Heinrich,
>
> 1) if the autoexposure is on - improve the light conditions.
> 2) turn off the autoexposure (clicking on its icon - "white circle") and
> decrease the exposure time. The units are 'ms'.
>

3) increase the analog gain. The deafult value is 2.0 for the green,
higher/lower for red and blue, depending on the color balance. When you
increase the gain , the noise will go up, but not as fast as the gain
itself, of course. Maximal gain is 15.75 for every color, if there is less
say blue than green (it is usually the case) you can not put the green gain
to the maximal value.

Andrey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20101117/f888375e/attachment-0002.html>