[Elphel-support] camera bricked after re-flashing to elphel353-8.0.9 :(

[Ákos Maróy]

On 17/11/10 19:14, Heinrich Mueller wrote:
> I was at this point, too.
> Does the netboot command yield any further output?
> Does it say "JUMP" at the end and the return value 0?

no, it says only as I posted...

> Connect a serial console (RS232 input at the side behind the cover)
> and look at the output, for example with ttylog or cutecom.

how would I do that? I only have an RJ45 connector on this thing..

> Does it say anything regarding nfs?

nope

> How far does it boot?

I wouldn't know :)


> What is your network configuration like? What does your exports file
> look like?

$ cat /etc/exports
# /etc/exports: the access control list for filesystems which may be
exported
#		to NFS clients.  See exports(5).
#
# Example for NFSv2 and NFSv3:
# /srv/homes       hostname1(rw,sync,no_subtree_check)
hostname2(ro,sync,no_subtree_check)
#
# Example for NFSv4:
# /srv/nfs4        gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
# /srv/nfs4/homes  gss/krb5i(rw,sync,no_subtree_check)
#

/nfs   192.168.0.0/255.255.0.0(rw,sync,no_root_squash)

network config:

ifconfig 192.168.0.20 netmask 255.255.255.0 eth0 up


I can mount the nfs export from my laptop just fine..