[Elphel-support] camera bricked after re-flashing to elphel353-8.0.9 :(

[Alexandre Poltorak]

Can I ask you to send result from
ls -R /nfs
here pls ?

Alexandre

On Wed, Nov 17, 2010 at 6:07 PM, Ákos Maróy <akos at maroy.hu> wrote:

> On 17/11/10 19:14, Heinrich Mueller wrote:
> > I was at this point, too.
> > Does the netboot command yield any further output?
> > Does it say "JUMP" at the end and the return value 0?
>
> no, it says only as I posted...
>
> > Connect a serial console (RS232 input at the side behind the cover)
> > and look at the output, for example with ttylog or cutecom.
>
> how would I do that? I only have an RJ45 connector on this thing..
>
> > Does it say anything regarding nfs?
>
> nope
>
> > How far does it boot?
>
> I wouldn't know :)
>
>
> > What is your network configuration like? What does your exports file
> > look like?
>
> $ cat /etc/exports
> # /etc/exports: the access control list for filesystems which may be
> exported
> #               to NFS clients.  See exports(5).
> #
> # Example for NFSv2 and NFSv3:
> # /srv/homes       hostname1(rw,sync,no_subtree_check)
> hostname2(ro,sync,no_subtree_check)
> #
> # Example for NFSv4:
> # /srv/nfs4        gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
> # /srv/nfs4/homes  gss/krb5i(rw,sync,no_subtree_check)
> #
>
> /nfs   192.168.0.0/255.255.0.0(rw,sync,no_root_squash)
>
> network config:
>
> ifconfig 192.168.0.20 netmask 255.255.255.0 eth0 up
>
>
> I can mount the nfs export from my laptop just fine..
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20101117/9d51b22b/attachment-0002.html>