[Elphel-support] Force streamer to low fps

[Oleg K Dzhimiev]

The FPSFLAGS & FP1000SLIM haven't been tested for some time - something
could have broken - so I need to test it.

On 7 April 2010 15:51, Ángel <elphriend at gmail.com> wrote:

> Thnak you, Oleg. I will try that. Then, must we better consider FPSFLAGS
> param as deprecated?
>
> 2010/4/7 Oleg <andersonnotgood at gmail.com>
>
> Dear Ángel,
>>
>> The easiest way is to put the sensor into the External Trigger Mode and
>> use the internal counter for trigger source.
>> http://192.168.0.9/parsedit.php -> External trigger controls, set
>> TRIG_PERIOD=<your_value> and TRIG=0x4.
>>
>> Best regards,
>> Oleg
>>
>> On 7 April 2010 10:24, Ángel <elphriend at gmail.com> wrote:
>>
>>> Hi, elphriends.
>>>
>>> How can I made the streamer run at, for example, 1 fps?
>>>
>>> I set FP1000SLIM=1000.
>>>
>>> With FPSFLAGS=0 the camera control interface shows 126.117 fps (green)
>>> With FPSFLAGS=1 shows 24.565 (green)
>>> With FPSFLAGS=2 shows 126.117 (green)
>>> With FPSFLAGS=3 shows 24.565 (green)
>>>
>>> This values apply for 640x480 but I have noted that the lower the frame
>>> size, the higher the minimum fps value I can achieve.
>>>
>>> Is it possible to force the streamer for running at low framerates?
>>>
>>> Thank you,
>>>
>>> Ángel.
>>>
>>> --
>>> Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP
>>>
>>> _______________________________________________
>>> Support-list mailing list
>>> Support-list at support.elphel.com
>>>
>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>>
>>>
>>
>
>
> --
> Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20100407/5db1af3f/attachment-0002.html>