[Elphel-support] Force streamer to low fps

[Ángel]

Thnak you, Oleg. I will try that. Then, must we better consider FPSFLAGS
param as deprecated?

2010/4/7 Oleg <andersonnotgood at gmail.com>

> Dear Ángel,
>
> The easiest way is to put the sensor into the External Trigger Mode and use
> the internal counter for trigger source.
> http://192.168.0.9/parsedit.php -> External trigger controls, set
> TRIG_PERIOD=<your_value> and TRIG=0x4.
>
> Best regards,
> Oleg
>
> On 7 April 2010 10:24, Ángel <elphriend at gmail.com> wrote:
>
>> Hi, elphriends.
>>
>> How can I made the streamer run at, for example, 1 fps?
>>
>> I set FP1000SLIM=1000.
>>
>> With FPSFLAGS=0 the camera control interface shows 126.117 fps (green)
>> With FPSFLAGS=1 shows 24.565 (green)
>> With FPSFLAGS=2 shows 126.117 (green)
>> With FPSFLAGS=3 shows 24.565 (green)
>>
>> This values apply for 640x480 but I have noted that the lower the frame
>> size, the higher the minimum fps value I can achieve.
>>
>> Is it possible to force the streamer for running at low framerates?
>>
>> Thank you,
>>
>> Ángel.
>>
>> --
>> Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP
>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>>
>


-- 
Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20100407/caf943cf/attachment-0002.html>