[Elphel-support] Force streamer to low fps

[Oleg]

Dear Ángel,

The easiest way is to put the sensor into the External Trigger Mode and use
the internal counter for trigger source.
http://192.168.0.9/parsedit.php -> External trigger controls, set
TRIG_PERIOD=<your_value> and TRIG=0x4.

Best regards,
Oleg

On 7 April 2010 10:24, Ángel <elphriend at gmail.com> wrote:

> Hi, elphriends.
>
> How can I made the streamer run at, for example, 1 fps?
>
> I set FP1000SLIM=1000.
>
> With FPSFLAGS=0 the camera control interface shows 126.117 fps (green)
> With FPSFLAGS=1 shows 24.565 (green)
> With FPSFLAGS=2 shows 126.117 (green)
> With FPSFLAGS=3 shows 24.565 (green)
>
> This values apply for 640x480 but I have noted that the lower the frame
> size, the higher the minimum fps value I can achieve.
>
> Is it possible to force the streamer for running at low framerates?
>
> Thank you,
>
> Ángel.
>
> --
> Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20100407/479e6fdc/attachment-0002.html>