[Elphel-support] about "103982"

[Elphel Support]

Dear Ali,



We developed the PCBs for CMV12000 for our customer who decided to cancel the project. So we have the boards built, but we never assembled and tested them and we haven't designed  FPGA and firmware code. We may revive this project in the future, but our current focus is on long-range 3D with visible and infrared cameras, and for visible range we prefer rolling shutter, not the snapshot ones.



Andrey



---- On Tue, 27 Oct 2020 02:15:32 -0600 ali tamimi <tamimiali73 at gmail.com> wrote ----


Dear All

I was browsing your website that saw a long list of sensors will be supported in future . It is a remarkable achievement  if  all of  various sensors are supported in future. 

As you mentioned the "103982" board for the sensor front end CMV12000 can be connected to 10393. You put PCB files but don't explain about software requirements. Is there any special driver for it; or need code change? 

Another question, why do you not mention CMV12000 in the main list of supported sensors?

I provide CMV8000 and want to drive it with your product "10393" and need your help to do that. It makes me proud to be part of your community and collaborate in your project.

best regards


_______________________________________________
Support-list mailing list 
mailto:Support-list at support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20201027/5e4cce49/attachment.html>