[Elphel-support] An error in replacing the 14-megapixel sensor(mt9f002) by 5-megapixel sensor(mt9006)

ali tamimi tamimiali73 at gmail.com
Mon Oct 19 04:33:14 PDT 2020


Hello Oleg
yes, i can 'ssh' to camera and also can send  the/var/log/autocampars.log.
The microSD card marked "5MPx" is also insert to the slot.
We opened the camera. When closing the sensor cable was pressed slightly
and deformed. I guess the cable is damaged. In the parts list of the "5
MPx" sensor, FFC cable with model number 050-30-51B, is provided. But by
connecting this cable, the sensor is not detected eaither.The connection
photo is sent in the attachment. Could there be a problem with the cable
(for example, impedance matching, etc.)?

On Sun, Oct 18, 2020 at 11:23 AM Oleg <support-list at support.elphel.com>
wrote:

> Hello Ali,
>
> Can you 'ssh' to the camera? Could you send the /var/log/autocampars.log?
>
>> ~$ ssh root at 192.168.0.9
>> ~# cat /var/log/autocampars.log
>
>
> Or if you use minicom - send the boot log.
>
> If I remember right you should have a microSD card marked a "5MPx" - the
> camera autoboots from the card - I suggest you try the card first. And the
> only thing you will need is to set "MT9*P*006" from the bootblock393 page.
>
> Regards,
> Oleg
>
> On Sun, Oct 18, 2020 at 7:56 AM ali tamimi <tamimiali73 at gmail.com> wrote:
>
>> Hello
>> We have provided your product 10393. Your camera is very well designed
>> and made. Thank you for your good products and complete documentation
>> and your support.
>> Sensor installed on 10393 is a 14-megapixel sensor (10398) "mt9f002" by
>> default that Works well. We also bought the 10338 "mt9006" sensor. By
>> replacing the sensors, the new one is not detectable and no image is seen
>> .
>> We downloaded the latest firmware, although the default sensor is
>> "mt9006"  in the manual, the "devicetree.dtb" replacement process was
>> performed according to the instructions,10393 nand flash was programmed
>> but the sensor is not detected again.The image of error in web interface
>> sent in the attachment. Thanks for your support in solving the problem.
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20201019/57225f94/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0619.JPG
Type: image/jpeg
Size: 1472503 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20201019/57225f94/attachment-0001.jpe>


More information about the Support-list mailing list