[Elphel-support] 答复: 答复: 答复: sync stereo with lidar

[Winston Zhang]

Hi Oleg
      We have two GPS, One GPS receiver is usb interface, the other is serial interface. the connector on the cable end of GPS receiver picture are as follow.
      [cid:image001.png at 01D3E846.66BFD8C0]  [cid:image002.png at 01D3E846.66BFD8C0] .




Best Regrad!
Yicheng-Zhang
Email:  winston.zhang at blacksesame.com.cn
Teil:    18516291005
Addr:   707 room, 7th floor, building 4th, No.1761, Zhangdong road, Pudong area

发件人: andersonnotgood at gmail.com [mailto:andersonnotgood at gmail.com] 代表 Oleg
发送时间: 2018年5月10日 星期四 8:57
收件人: Tao Zhang <tao.zhang at blacksesame.com.cn>
抄送: Winston Zhang <winston.zhang at blacksesame.com.cn>; Qun Gu <qun.gu at blacksesame.com>; David Zhang <david.zhang at blacksesame.com.cn>; elphel support-list <support-list at support.elphel.com>
主题: Re: [Elphel-support] 答复: 答复: sync stereo with lidar

Hi,

so we need to buy a 103696 board. after we have the board, we need to open the shell to connect to j8 and j9，but then we will not be able to close the shell，right? can you give an instructions of how to connect that board to 10393 camera.

No shell. J8 and J9 are physical connectors - please, check with PCB schematics - https://wiki.elphel.com/wiki/10389 - there's link to 10389b.pdf. Or inspect the 10389 board you have - they are in the 'front' on the same side as SSD.

Connect: GPS receiver > 103696 > 10389, then boot the camera and it's supposed to work.
Could you send a picture of the connector on the cable end of your GPS receiver?

Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180510/0294649c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 121719 bytes
Desc: image001.png
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180510/0294649c/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 210918 bytes
Desc: image002.png
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180510/0294649c/attachment-0003.png>