[Elphel-support] Trigger Output

[Richard Rigby]

Hi Andrey,

Thank you. In that case I will need to purchase the 10389 board.


Kind regards,

*Richard Rigby*
Software Developer


www.redzone.com

 Ph: +64 9 479 9901

Fax: +64 9 479 9904


13 Tarndale Grove • Albany • Auckland 0632 • New Zealand

On 22 March 2018 at 12:54, Elphel Support <support-list at support.elphel.com>
wrote:

> Richard,
>
> Sorry it was not easy to find on our wiki, I added cross-links:
> https://wiki.elphel.com/wiki/Trigger_393
> https://wiki.elphel.com/wiki/103891
>
> 10389 is needed to generate trigger output. There are two types of trigger
> output to generate it:
> 1. 5V/0.5A non-isolated, referenced to the camera GND.
> 2. Opto-isolated through opto-transistor
>
> Output can be either synchronized to the images or just manual as GPIO.
>
> Andrey
>
> ---- On Wed, 21 Mar 2018 15:49:56 -0700 *Richard Rigby<rrigby at redzone.com
> <rrigby at redzone.com>>* wrote ----
>
> Hi,
>
> I would like to connect an external circuit to the camera trigger output,
> where is the trigger output? Can I connect directly to the main board or to
> the 10389 interface board?
>
> Kind regards,
>
> *Richard Rigby*
> Software Developer
>
>
> www.redzone.com
>
>  Ph: +64 9 479 9901
>
> Fax: +64 9 479 9904
>
>
> 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand
> <https://maps.google.com/?q=13+Tarndale+Grove+%E2%80%A2+Albany+%E2%80%A2+Auckland+0632+%E2%80%A2+New+Zealand&entry=gmail&source=g>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180322/539fe188/attachment.html>