[Elphel-support] Trigger Output

[Elphel Support]

Richard,

Sorry it was not easy to find on our wiki, I added cross-links:
https://wiki.elphel.com/wiki/Trigger_393
https://wiki.elphel.com/wiki/103891

10389 is needed to generate trigger output. There are two types of trigger output to generate it:
1. 5V/0.5A non-isolated, referenced to the camera GND.
2. Opto-isolated through opto-transistor

Output can be either synchronized to the images or just manual as GPIO.

Andrey

---- On Wed, 21 Mar 2018 15:49:56 -0700 Richard Rigby<rrigby at redzone.com> wrote ---- 

Hi, 

I would like to connect an external circuit to the camera trigger output, where is the trigger output? Can I connect directly to the main board or to the 10389 interface board?


Kind regards,

Richard Rigby
Software Developer




www.redzone.com



 Ph: +64 9 479 9901
Fax: +64 9 479 9904


13 Tarndale Grove • Albany • Auckland 0632 • New Zealand
















 

 _______________________________________________ 
Support-list mailing list 
Support-list at support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com 





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180321/5091a095/attachment-0001.html>