[Elphel-support] Script for changing the SADDR bit for the MT9P031 sensor

[Frederick Gamache]

Hi Oleg,

I cannot simply replace the files from the original micro SD card with the
new ones using Windows?

Frederick

On Thu, Mar 8, 2018 at 11:32 AM, Oleg <support-list at support.elphel.com>
wrote:

> Hi,
>
>
>> Can you send me an updated version of the firmware using the 0x5D addr
>> please?
>>
> Ok, I will send you a link once I prepare it later today. I will turn the
> kernel debug on.
>
> Will I be able to copy the files you will send me on the camera micro SD
>> card so I can boot from it?
>>
> Do you have linux? There will be a script *write_bootable_mmc.py* in the
> archive that can format it, provided it's discovered in the system as
> /dev/sdX (if it's discovered as /dev/mmcblk the script will need a minor
> modification)
> The instructions how to format it manually can be found here
> <https://wiki.elphel.com/wiki/Sd_boot_rootfs>.
>
> Best regards,
> Oleg Dzhimiev
> Electronics Engineer
> phone: +1 801 783 5555 x124 <(801)%20783-5555>
> Elphel, Inc.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180308/e53ab8f7/attachment.html>