[Elphel-support] 353 Problem Mainboards

[Oleg]

>
> I deleted /etc/autocampars.xml and went to
> http://10.23.33.9/index.php?site=autocampars.php again to re-generate it
> which just resulted in an error message. The error message is also in the
> GDoc.
>
That worked with the board I'm testing.

What if you reboot?
Try from command line?

[root at Elphel353 /root]759# */usr/html/autocampars.php --init*
> autocampars.php created a new configuration file /etc/autocampars.xml from
> defaults.
> Current frame=1266, sleeping to give daemons a chance
> Current frame=1319, waking up, daemons should be dead already
> before reset - current frame=0
> after reset - current frame=2
> setting COMPRESSOR_RUN=2
> setting DAEMON_EN=Array
> (
>    [DAEMON_EN_AUTOEXPOSURE] => 1
>    [DAEMON_EN_STREAMER] => 1
>    [DAEMON_EN_CCAMFTP] => 0
>    [DAEMON_EN_CAMOGM] => 0
>    [DAEMON_EN_TEMPERATURE] => 0
>    [DAEMON_EN] => 3
> )
> after setParsFromPage - current frame=12
> Sensor was successfully initialized at August 17, 2018, 11:49 pm from
> /etc/autocampars.xml page 0


Regards,
Oleg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180817/ce913710/attachment.html>