[Elphel-support] 353 Problem Mainboards

[Linden @ Zone4]

I have run '/usr/html/autocampars.php --init', looks like a very similar
error trace to loading http://10.23.33.9/index.php?site=autocampars.php.
Output posted at bottom of GDoc:
https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJLodron0P0zYcpB4/edit?usp=sharing

Linden Mills-Connery
Zone4 Team <https://zone4.ca/contact/>
205-820 Main Street
Canmore, AB, T1W2B7
403-401-7215

On 17 August 2018 at 17:53, Oleg <support-list at support.elphel.com> wrote:

> I deleted /etc/autocampars.xml and went to http://10.23.33.9/index.
>> php?site=autocampars.php again to re-generate it which just resulted in
>> an error message. The error message is also in the GDoc.
>>
> That worked with the board I'm testing.
>
> What if you reboot?
> Try from command line?
>
> [root at Elphel353 /root]759# */usr/html/autocampars.php --init*
>> autocampars.php created a new configuration file /etc/autocampars.xml
>> from defaults.
>> Current frame=1266, sleeping to give daemons a chance
>> Current frame=1319, waking up, daemons should be dead already
>> before reset - current frame=0
>> after reset - current frame=2
>> setting COMPRESSOR_RUN=2
>> setting DAEMON_EN=Array
>> (
>>    [DAEMON_EN_AUTOEXPOSURE] => 1
>>    [DAEMON_EN_STREAMER] => 1
>>    [DAEMON_EN_CCAMFTP] => 0
>>    [DAEMON_EN_CAMOGM] => 0
>>    [DAEMON_EN_TEMPERATURE] => 0
>>    [DAEMON_EN] => 3
>> )
>> after setParsFromPage - current frame=12
>> Sensor was successfully initialized at August 17, 2018, 11:49 pm from
>> /etc/autocampars.xml page 0
>
>
> Regards,
> Oleg
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180817/b1e60d40/attachment.html>