[Elphel-support] Elphel 353 server
Daniel Rouan
dan.rouan at free.fr
Fri Feb 10 06:30:14 PST 2017
Many thanks Oleg for your advices.
It works now with the sensor connected to J2.
The web server is now OK and I got images.
Finally it was indeed a question of cable and proper connection.
By the way the small plastic clip that presses the cable on the pins of the connector
is broken and I replaced it by a piece of cardboard (rapped with several pieces of scotch
tape to reach the right thickness) inserted together with the cable end: this may explain
a previous bad connection.
regards,
Daniel
Le 10 févr. 2017 à 15:14, Oleg <support-list at support.elphel.com> a écrit :
> Daniel,
>
> So, your current connections are (10359 - mux board (its connectors are marked as J1-4), 10353 - system board):
> 10359 J1 - 10353
> 10359 J2 - sensor
>
> J1 is for the system board.
> One of the sensors sould always be connected to J2, so:
> * If the sensor is single it should go to J2.
> * If 2 sensors then J2 and J3 (or J2 and J4)
>
> What's the firmware revision, btw - 8.2.16 ?
>
> Try:
> 1. in telnet:
> mv /etc/autocampars.xml /etc/autocampars.xml_bkp
> sync
> reboot -f
> Check the 'dmesg' output.
>
> This will generate a new configuration file. It could have been generated for other connection scheme where no sensors were detected at the 1st boot after firmware update.
>
>
> 2. If you connect the sensor directly to the system board and regenerate the config file (as in 1.) - and the sensor gets detected - then you should be able to get images. After
>
> Note:
> if the camera gets stuck at 'starting hardware sequencers', in telnet:
> killall -9 php
> There won't be images but the web server will work.
>
> Best regards,
> Oleg Dzhimiev
> Electronics Engineer
> phone: +1 801 783 5555 x124
> Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20170210/411a9501/attachment-0002.html>
More information about the Support-list
mailing list