[Elphel-support] Elphel 353 server
Daniel Rouan
dan.rouan at free.fr
Fri Feb 10 05:27:58 PST 2017
Oleg,
Sorry for the flood of messages…
Apparently I can send commands through the port 8081, such bimg, but for instance
the image returned is 1 px gif. As if the sensor was not actually running.
Is there some command to make a deeper test ?
Daniel
Le 10 févr. 2017 à 13:36, Daniel Rouan <dan.rouan at free.fr> a écrit :
> Oleg,
>
> Just after ending the previous email, I changed to the connector that is the
> closest from the DC/DC converter FKC08-48. (silver box) and the msg returned
> by dmesg is changed : the sensor is found ! (see attached).
>
> But, the browser (firefox) cannot connect anymore.
>
> regards,
>
> Daniel
>
>
> <dmesg_result2.rtf>
>
> Le 10 févr. 2017 à 13:15, Daniel Rouan <dan.rouan at free.fr> a écrit :
>
>> Oleg,
>>
>> I changed the cable with a spare one (for my application I had to buy longer
>> cables) but the result is the same.
>>
>> By the way I'm doing the tests with one unique sensor (the other one is at another
>> place, far away) : is that a problem ? are the 3 connectors on the mux board equivalent
>> to make the test ?
>>
>> regards,
>>
>> Daniel
>>
>>
>> Le 9 févr. 2017 à 18:10, Oleg <support-list at support.elphel.com> a écrit :
>>
>>> Daniel,
>>>
>>> I see. Must be something wrong with either cables, sensor boards or a mux board (but it was detected and programmed) - the boards are usually more reliable than the cables.
>>>
>>> If possible try to reconnect the long cables that connect the mux board (0353-00-08) and sensors (0353-00-15) - see the 3D model (cables not shown).
>>> First try the sensor side then the mux side.
>>>
>>> If that doesn't work - you might have to send us the camera. Contact sales at elphel.com for details.
>>>
>>> Best regards,
>>> Oleg Dzhimiev
>>> Electronics Engineer
>>> phone: +1 801 783 5555 x124
>>> Elphel, Inc.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20170210/1f2e4ad4/attachment-0002.html>
More information about the Support-list
mailing list