[Elphel-support] 10393 for KAI11002 firmware

[Yakov]

Hello Andrey. How do you think who can write a firmware for 10393 to
run older KAI11002 sensor boards from 323?

Regards,
Iakov(Yakov) Petrov.

On Sun, Jul 3, 2016 at 8:07 AM, Yakov <queilasha at gmail.com> wrote:
> Ok. You can't develop software. Pity. I will try to find someone to
> outsource software development. I just need software for one machine.
> Global shutter and CCD's much much better. For book scanning. Why
> global shutter. Because camera moving up and down. 1500 times in one
> hour. Check Treventus.
> CCD's because of the color. CMOS have issues with blue channel.
>
> Regards,
> Iakov(Yakov) Petrov.
>
> On Sun, Jul 3, 2016 at 7:59 AM, support-list
> <support-list at support.elphel.com> wrote:
>> Yakov,
>>
>> we are too busy with the current projects so we only can help with some
>> consultations, not do the actual design.
>>
>> And why do you think global shutter is better for book scanning? Rolling
>> shutter ones provide better S/N for the same pixel size
>>
>> Andrey
>>
>> ---- On Sat, 02 Jul 2016 19:26:47 -0700 Yakov<queilasha at gmail.com> wrote
>> ----
>>
>> Yeah. But these sensors are CCD and have global shutter. Ideal for
>> book scanning in industrial scale.
>> How much will be to write such a firmware for 10393? Do you have
>> firmware for 10353? Maybe some other sensor boards can be developed
>> based on 25MP CMOS global shutter sensors?
>>
>> Regards,
>> Iakov(Yakov) Petrov.
>>
>> On Sun, Jul 3, 2016 at 7:21 AM, support-list
>> <support-list at support.elphel.com> wrote:
>>> Yakov,
>>>
>>> Just one will definitely be enough, but there is no code to run these
>>> sensor
>>> boards. And as these sensors are rather old it may be easier to just use
>>> NC323 than to develop firmware fro the 393 to run these sensors.
>>>
>>> Andrey
>>>
>>> ---- On Sat, 02 Jul 2016 19:07:02 -0700 Yakov<queilasha at gmail.com> wrote
>>> ----
>>>
>>> Hello Andrey. How many 10393 CPU boards I need to run 3 KAI11002 at
>>> 4.8 fps at 30mhz?
>>>
>>> Regards,
>>> Iakov(Yakov) Petrov.
>>>
>>> On Mon, Aug 24, 2015 at 11:24 PM, support-list
>>> <support-list at support.elphel.com> wrote:
>>>> Hello Yakov,
>>>>
>>>> The 10393 boards (main boards of the NC393 cameras) are
>>>> hardware-compatible
>>>> with the older sensor boards. The new system board has 4 identical ports
>>>> each with the pinout compatible with 10313, 10333 and 10353 boards. The
>>>> new
>>>> camera will also support modern serial sensor interfaces, but the bakward
>>>> compatibility will be 100% preserved - with the flexibility of FPGA it is
>>>> not that difficult.
>>>>
>>>> I just finished simulation of the camera FPGA (comparing against 10353
>>>> with
>>>> the same sensor data) and now I'm starting to test it on the actual
>>>> hardware
>>>>
>>>>
>>>> Andrey
>>>>
>>>> Hello. Will NC393 boards will be backward compatible with 323 hardware?
>>>>
>>>> Best regards,
>>>> Yakov Petrov.
>>>>
>>>
>>> _______________________________________________
>>> Support-list mailing list
>>> Support-list at support.elphel.com
>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>>
>>>
>>>
>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>>
>>