[Elphel-support] Elphel NC323-2
smedeni1990 at gmail.com
smedeni1990 at gmail.com
Mon Feb 29 03:20:47 PST 2016
Okey!) Thank you ) The camera works
Отправлено с iPhone
> 29 февр. 2016 г., в 11:03, support-list <support-list at support.elphel.com> написал(а):
>
> Denis,
>
> We could definitely communicate in Russian, but most other readers of this mailing list would need Google Translate or similar :-)
> You may try using ARP as described on this wiki page http://wiki.elphel.com/index.php?title=Network_configuration , just remember that it is active first couple minutes after the camera is powered up. And it may boot about a minute.
>
> Andrey
>
>
>
>
> ---- On Sun, 28 Feb 2016 23:43:42 -0800 <smedeni1990 at gmail.com> wrote ----
> Андрей, здравствуйте ) Давайте перейдём на русский? Я Вам писал по поводу камеры 323-2. Я не понимаю, как соединится с камерой. Распишите пожалуйста подробнее мои шаги, обязательно ли использование Wincamp?)
> С уважением, Денис
> Отправлено с iPhone
>
>> 29 февр. 2016 г., в 10:26, support-list <support-list at support.elphel.com> написал(а):
>>
>> Hello Denis,
>>
>> Camera does not have "factory reset", the button just allows to reflash it over the network.
>>
>> As you purchased used Google camera, it probably has some Google network local IP. It is likely to be in 10.0.0.0/8 range, not in 192.168.0.0/16.
>>
>> I'll find out - there was some way to connect to the camera with unknown IP.
>>
>> Andrey
>>
>> ---- On Sun, 28 Feb 2016 22:20:12 -0800 Denis Smetankin<... at gmail.com> wrote ----
>>
>> Hello! We bought Elphel 323-2 camera for scientific purposes ( S/N 000E6403097A ) . Having trouble connecting to a computer . We established the factory settings by pressing the button , but there is no connection with the node 192.168.0.9. Please, sequence settings for the network connection of a computer and a camera . Maybe get instructions ( detailed Datasheet) for the operation and setting of this camera. Thank You!)
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20160229/ed930a1d/attachment-0002.html>
More information about the Support-list
mailing list