[Elphel-support] 10393 firmware for 10342 & 10344

[Yakov]

Hello Andrey. As I have found out nobody who can help me with 393 firmware
to support 10342 and 10344 at this part of the world. I hope somewhere
between your projects your guys will find spare time to implement it's
support. I can wait a year. I'm not sure that I can do it myself. I have
no  experience in coding or any experience in VDT or VHDL.  As we
previously discussed CCD's is much better for stills. It have global
shutter and more realistic colors. Global shutter is essential to shoot
moving targets or through moving objects, in ex shooting through fan blades
of UAV.

Regards,
Iakov(Yakov) Petrov.

On Sun, Jul 3, 2016 at 7:59 AM, support-list <
support-list at support.elphel.com> wrote:

> Yakov,
>
> we are too busy with the current projects so we only can help with some
> consultations, not do the actual design.
>
> And why do you think global shutter is better for book scanning? Rolling
> shutter ones provide better S/N for the same pixel size
>
> Andrey
>
> ---- On Sat, 02 Jul 2016 19:26:47 -0700 *Yakov<queilasha at gmail.com
> <queilasha at gmail.com>>* wrote ----
>
> Yeah. But these sensors are CCD and have global shutter. Ideal for
> book scanning in industrial scale.
> How much will be to write such a firmware for 10393? Do you have
> firmware for 10353? Maybe some other sensor boards can be developed
> based on 25MP CMOS global shutter sensors?
>
> Regards,
> Iakov(Yakov) Petrov.
>
> On Sun, Jul 3, 2016 at 7:21 AM, support-list
> <support-list at support.elphel.com> wrote:
> > Yakov,
> >
> > Just one will definitely be enough, but there is no code to run these
> sensor
> > boards. And as these sensors are rather old it may be easier to just use
> > NC323 than to develop firmware fro the 393 to run these sensors.
> >
> > Andrey
> >
> > ---- On Sat, 02 Jul 2016 19:07:02 -0700 Yakov<queilasha at gmail.com>
> wrote
> > ----
> >
> > Hello Andrey. How many 10393 CPU boards I need to run 3 KAI11002 at
> > 4.8 fps at 30mhz?
> >
> > Regards,
> > Iakov(Yakov) Petrov.
> >
> > On Mon, Aug 24, 2015 at 11:24 PM, support-list
> > <support-list at support.elphel.com> wrote:
> >> Hello Yakov,
> >>
> >> The 10393 boards (main boards of the NC393 cameras) are
> >> hardware-compatible
> >> with the older sensor boards. The new system board has 4 identical
> ports
> >> each with the pinout compatible with 10313, 10333 and 10353 boards. The
> >> new
> >> camera will also support modern serial sensor interfaces, but the
> bakward
> >> compatibility will be 100% preserved - with the flexibility of FPGA it
> is
> >> not that difficult.
> >>
> >> I just finished simulation of the camera FPGA (comparing against 10353
> >> with
> >> the same sensor data) and now I'm starting to test it on the actual
> >> hardware
> >>
> >>
> >> Andrey
> >>
> >> Hello. Will NC393 boards will be backward compatible with 323 hardware?
> >>
> >> Best regards,
> >> Yakov Petrov.
> >>
> >
> > _______________________________________________
> > Support-list mailing list
> > Support-list at support.elphel.com
> >
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
> >
> >
> >
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20160804/c179e592/attachment-0002.html>