[Elphel-support] Bad line-scan output

[Linden Mills-Connery]

Sounds good. Is this just the sensor board at the front that will be
replaced? I would like to ship directly to the client (Louisiana). How do
we proceed?

Linden

On Thursday, April 24, 2014, Oleg <support-list at support.elphel.com> wrote:

> Hi,
>
> On the screenshots it looks ok.
>
> The further thoughts:
> It might be bad sensor initialization at power up. I've seen this but
> don't know what causes it - normally power cycle fixes the problem and the
> pictures don't get bad during the work.
>
> We can replace the board in the camera so we could have a close look at it.
>
> Best regards,
> Oleg Dzhimiev
> Electronics Engineer
> phone: +1 801 783 5555 x124
> Elphel, Inc.
>


-- 
Linden Mills-Connery
Zone4 Team <http://new.zone4.ca/contact>
205-820 Main Street
Canmore, AB, T1W2B7
403-401-7215
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20140425/a278c8fe/attachment-0002.html>