[Elphel-support] stereo camera with BW CCD
drouan
daniel.rouan at obspm.fr
Mon Sep 9 13:47:19 PDT 2013
Andrey,
Le 7 sept. 2013 à 20:37, support-list <support-list at support.elphel.com> a écrit :
> Imgsrv has "/trig" command that issues a single trigger if the camera is set to single trigger mode, but for testing of the corrupted images it may be simpler to just use some definitely slow fps (like 1 FPS) by setting TRIG_PERIOD to 90000000 (it is measured in pixel clock periods, and the default clock is 90 MHz). When you use a single trigger mode you may need several frames triggers to propagate all the parameter changes through the image acquisition pipeline (sensor+fpga)
>
OK. This is what I did. The result is the same: images scrambled with TRIG_PERIOD = 90000000
> 300 cable mm should be OK to adjust the phase
Good news.
Now I did what you previously suggested:
> Did you try to change height after reducing width (and getting bad images)?
Yes : same problem
> Do both sensors work correctly with reduced WOI if only one is used, not both?
What I did is just setting MULTI_MODE = 0 but I kept the other identical (especially TRIG = 4), correct ?
The result is unfortunately also a corrupted image (see pdf here: https://upload.obspm.fr/get?k=1UAi3j9quiVKUdS0BWk ).
Daniel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20130909/db61074a/attachment-0002.html>
More information about the Support-list
mailing list