[Elphel-support] Upgrading from nc353l to nc353l - 369

[Biel Bestué de Luna]

OK! thanks Oleg! :)


2013/3/29 Oleg <support-list at support.elphel.com>

> Biel,
>
> No, just tell you want to upgrade from nc353l to nc353l-369 - we'll send
> all the parts you need with all the screws.
>
> Btw, I wasn't correct with the back panel - just a new sticker is enough.
>
> Regards,
> Oleg
>
> On 29 March 2013 15:26, Biel Bestué de Luna <7318.tk at gmail.com> wrote:
>
>> oops I'm sorry...
>>
>> Oleg do I need to tell to the parts all the list of components to the
>> sells department at Elphel (you know, making a list of the components as
>> well as the little bolts and screws)? if so, based on the hardware I
>> already have within the Elphel nc353l, what sort of parts and components
>> would I need to list beside the eSATA and the USB connector cards, the new
>> top cover part, as well as the 10369 card?
>>
>>
>> 2013/3/29 Biel Bestué de Luna <7318.tk at gmail.com>
>>
>>> Oleg how do I aq
>>>
>>>
>>> 2013/3/29 Oleg <support-list at support.elphel.com>
>>>
>>>> Hi,
>>>>
>>>>>  Hi, not long ago I acquired the nc353l – 12v kit and for some time
>>>>> it served it's purpose, but now I would like to upgrade the camera to the
>>>>> nc353l – 369 so I can eventually record with an external eSATA HDD,
>>>>> my questions are the following:
>>>>>
>>>> 10369 has a SATA port.
>>>>
>>>>>  Since I won't need the CF cards, what parts of hardware do I need to
>>>>> buy from Elphel to make the upgrade from nc353l to nc353l – 369?
>>>>>
>>>>  http://www3.elphel.com/wiki/10369
>>>> 1x10369 board - it comes with adapter for CF cards (103691) and a USB
>>>> adapter (103693).
>>>>
>>>> A camera with 10369 has a different top cover<http://wiki.elphel.com/index.php?title=Elphel_camera_parts_0353-11#0353-11-02_-_camera_top_with_connector_holes_for_the_10369_.28serial_port.2C_optoisolated_I.2FO.29.2C_l.3D104.77mm> with
>>>> openings for the trigger and console ports.
>>>> To install the USB adapter you would also need a new back panel<http://wiki.elphel.com/index.php?title=Elphel_camera_parts_0353-13#0353-13-02_-_Back_Panel.2C_with_holes_for_network.2C_SATA_and_USB_connectors>
>>>> .
>>>>
>>>>> After making the upgrade do I need to change any firmware?
>>>>>
>>>> No
>>>>
>>>> Best regards,
>>>> Oleg Dzhimiev
>>>> Electronics Engineer
>>>> phone: +1 801 783 5555 x124
>>>> Elphel, Inc.
>>>
>>>
>>>
>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20130329/cd31991a/attachment-0002.html>