[Elphel-support] Upgrading from nc353l to nc353l - 369

[Oleg]

Biel,

No, just tell you want to upgrade from nc353l to nc353l-369 - we'll send
all the parts you need with all the screws.

Btw, I wasn't correct with the back panel - just a new sticker is enough.

Regards,
Oleg

On 29 March 2013 15:26, Biel Bestué de Luna <7318.tk at gmail.com> wrote:

> oops I'm sorry...
>
> Oleg do I need to tell to the parts all the list of components to the
> sells department at Elphel (you know, making a list of the components as
> well as the little bolts and screws)? if so, based on the hardware I
> already have within the Elphel nc353l, what sort of parts and components
> would I need to list beside the eSATA and the USB connector cards, the new
> top cover part, as well as the 10369 card?
>
>
> 2013/3/29 Biel Bestué de Luna <7318.tk at gmail.com>
>
>> Oleg how do I aq
>>
>>
>> 2013/3/29 Oleg <support-list at support.elphel.com>
>>
>>> Hi,
>>>
>>>>  Hi, not long ago I acquired the nc353l – 12v kit and for some time it
>>>> served it's purpose, but now I would like to upgrade the camera to the
>>>> nc353l – 369 so I can eventually record with an external eSATA HDD, my
>>>> questions are the following:
>>>>
>>> 10369 has a SATA port.
>>>
>>>>  Since I won't need the CF cards, what parts of hardware do I need to
>>>> buy from Elphel to make the upgrade from nc353l to nc353l – 369?
>>>>
>>>  http://www3.elphel.com/wiki/10369
>>> 1x10369 board - it comes with adapter for CF cards (103691) and a USB
>>> adapter (103693).
>>>
>>> A camera with 10369 has a different top cover<http://wiki.elphel.com/index.php?title=Elphel_camera_parts_0353-11#0353-11-02_-_camera_top_with_connector_holes_for_the_10369_.28serial_port.2C_optoisolated_I.2FO.29.2C_l.3D104.77mm> with
>>> openings for the trigger and console ports.
>>> To install the USB adapter you would also need a new back panel<http://wiki.elphel.com/index.php?title=Elphel_camera_parts_0353-13#0353-13-02_-_Back_Panel.2C_with_holes_for_network.2C_SATA_and_USB_connectors>
>>> .
>>>
>>>> After making the upgrade do I need to change any firmware?
>>>>
>>> No
>>>
>>> Best regards,
>>> Oleg Dzhimiev
>>> Electronics Engineer
>>> phone: +1 801 783 5555 x124
>>> Elphel, Inc.
>>
>>
>>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20130329/106c32f8/attachment-0002.html>