[Elphel-support] Dual sensor camera

[David Johnson]

Can you produce a 353 camera two sensor system setup with these capabilities/specs?
Vehicle-mounted camera with two sensor heads pointing at the ground.
Create one panoramic image from the two sensors with minimal overlap.Image must span 36 feet (11 meters) ground coverage.(Two abutted images will double the horizontal resolution of the image)
Maximum sensor separation - 7 feet (2.1 meters).Maximum sensor/camera height - 12 feet (3.65 meters).(Mounting the camera/sensors as low as possible is preferred)
Camera will operate in line scan mode.External trigger for line scan mode.
GPS and compass on camera to determine camera position and compass orientation.Onboard HDD or SSD.
What lenses would be required to meet the above specs?Can the camera run at 2300 scans per second as configured above?
David
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20130606/fd610530/attachment-0002.html>