[Elphel-support] Elphel NC353L No HDD found

[Sebastian Pichelhofer]

Quick email from my holiday destination :)
I just swapped the system boards of the 2 cameras I have to assemble the
one for Patrick. I am 100% sure both cameras worked flawlessly before and
also tested the camera after assembly I just didn't test the sata port
individually at the time. What does the bootlog/dmesg indicate ? Sorry, I
can't really spend time to debug anything here on my phone?

Regards Sebastian
Am 05.08.2013 14:57 schrieb "Patrick Eisenkeil" <PatetheKing at gmx.net>:

> We found out that our camera was build from sebastian pichelhofer with
> parts of two cameras one with a internal IDE and one with an external HDD.
> He told us that he used the pcb from the camera with the internal IDE to
> build the camera. Maybe the SATA port is disabled is there any possibility
> to enable it.
>
> Patrick
>
>  *Gesendet:* Montag, 29. Juli 2013 um 21:44 Uhr
> *Von:* support-list <support-list at support.elphel.com>
> *An:* "Patrick Eisenkeil" <PatetheKing at gmx.net>, "Elphel List" <
> support-list at support.elphel.com>
> *Betreff:* Re: [Elphel-support] Elphel NC353L No HDD found
>  Hello Patric,
>
> Our records show that this camera was assembled from the boards outside of
> Elphel, so while each board was tested individually, we did not have a
> chance to test the assembled camera. Do you know if the camera did work
> with SATA disk before?
>
> Andrey
>
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20130805/ab4f09b4/attachment-0002.html>