[Elphel-support] Elphel camera with Raspberry Pi

[Alexandre Poltorak]

Hello David,

Auto-negotiation between raspbery-pi and Elphel 353 with a
power-injector in the middle may not work. Please try to manually set
the network link using mii-tool on Raspbery-pi.

Regards,
Alexandre

On Mon, Oct 29, 2012 at 6:03 PM, David Haberthür
<david.haberthuer at psi.ch> wrote:
> Dear All.
> I intend to run an Elphel NC353L [1] on a Raspberry Pi [2], but run into
> troubles with the connection. Whenever I connect the camera via Ethernet,
> the yellow LED starts to blink, but I cannot connect to the camera with the
> Browser. Whenever I ping the camera on 192.168.0.9, the green LED
> periodically blinks, but the terminal of the Raspberry Pi complains that the
> "host is unreachable".
> Whenever I plug the Ethernet cable into my Macbook Pro I get a connection
> without troubles. Do I need to configure the Ethernet port on Debian to talk
> to the camera while I don't need to do that on OS X? Whenever I connect a
> LAN cable I can access the web on the Raspberry Pi, just not the camera...
> I would be grateful for some help,
> David
>
> [1]: Currently on loan by the "Swiss office" of Elphel, Alexandre Poltorak.
> [2]: http://www.raspberrypi.org/
>
> --
> Dr. David Haberthür
> Swiss Light Source
> Paul Scherrer Institut
> WBBA/207
> CH-5232 Villigen
> +41 56 310 31 80
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com