[Elphel-support] binning modes, sum and average, how to change them?
Oleg
support-list at support.elphel.com
Fri Oct 12 16:56:44 PDT 2012
Biel,
My bad, the address should be in quotes, otherwise wget treats parameters
in the line as something else:
> wget "http://elphel/parsedit.php?DCM_HOR&DCM_VERT&BIN_HOR&BIN_VERT"
wget output show only the download status. The contents of the request can
stored in a separate file.
'embed' & 'immediate':
The effect is better seen if you open links in the browser
(firefox/chrome...):
'embed=0.18' will show you an image from the camera on the page.
'immediate' - the parsedit.php response will be in an xml format (versus
html page by default).
"SENSOR_REGS32" a parameter somewhere in the camera? where can I review it?
In your browser go http://elphel/parsedit.php?SENSOR_REGS32, but ideally
you shouldn't use it. Go with DCM_HOR,DCM_VERT,BIN_HOR & BIN_VERT
There's a GUI way to read parameters - go to http://elphel -> Parameter
Editor -> check the groups of interest -> "View/Edit"-link
What's your goal, btw?
For example, you could write a script on php that would be doing the same
things with parsing an xml response in it pretty easily. And you would be
able to call it from a command line or from a browser.
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
On 12 October 2012 17:20, Biel Bestué de Luna <7318.tk at gmail.com> wrote:
> I've been trying both methods but I couldn't see any change (the strange
> language on my terminal is catalan):
>
> $ wget
> http://elphel/parsedit.php?embed=0.18&DCM_HOR&DCM_VERT&BIN_HOR&BIN_VERT
> [2] 2421
> [3] 2422
> [4] 2423
> [5] 2424
> --2012-10-13 00:56:28-- http://elphel/parsedit.php?embed=0.18
> Resolent elphel (elphel)... 192.168.1.9
> S'està connectant a elphel (elphel)|192.168.1.9|:80... conectat.
> HTTP: Petició enviada, esperant resposta... DCM_VERT: no s'ha trobat
> l'ordre
> [1] Fet wget http://elphel/parsedit.php?embed=0.18
> BIN_HOR: no s'ha trobat l'ordre
> [1] Fet wget http://elphel/parsedit.php?embed=0.18
> DCM_HOR: no s'ha trobat l'ordre
> BIN_VERT: no s'ha trobat l'ordre
> [1] Fet wget http://elphel/parsedit.php?embed=0.18
> [1] Fet wget http://elphel/parsedit.php?embed=0.18
> [1] Fet wget http://elphel/parsedit.php?embed=0.18
> [3] Fi d'execuci? amb l'estat 127 DCM_HOR
> [4]- Fi d'execuci? amb l'estat 127 DCM_VERT
> [5]+ Fi d'execuci? amb l'estat 127 BIN_HOR
> biel at biel-F5VL:~/elphel$ 200 OK
> Longitud: no especificat [text/html]
> S'està desant a: «parsedit.php?embed=0.18.1»
>
> [
> <=>
> ] 4.656 --.-K/s en 0,001s
>
> 2012-10-13 00:56:28 (6,49 MB/s) - s'ha desat «parsedit.php?embed=0.18.1»
> [4656]
>
> and also:
>
> $ wget http://elphel/parsedit.php?embed=0.18&SENSOR_REGS32
> [1] 2414
> --2012-10-13 00:55:16-- http://elphel/parsedit.php?embed=0.18
> Resolent elphel (elphel)... 192.168.1.9
> S'està connectant a elphel (elphel)|192.168.1.9|:80... conectat.
> HTTP: Petició enviada, esperant resposta... SENSOR_REGS32: no s'ha trobat
> l'ordre
> biel at biel-F5VL:~/elphel$ 200 OK
> Longitud: no especificat [text/html]
> S'està desant a: «parsedit.php?embed=0.18»
>
> [ <=> ] 4.657 --.-K/s en
> 0,001s
>
> 2012-10-13 00:55:16 (4,40 MB/s) - s'ha desat «parsedit.php?embed=0.18»
> [4657]
>
> ------------------------------------------------------------------
>
> in parsedit.php, what is the difference between "?embed=0.18" and
> "?immediate" ?
> is "SENSOR_REGS32" a parameter somewhere in the camera? where can I review
> it?
> from the "camera control interface" can you change between the two binning
> modes?
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20121012/e310a6cf/attachment-0002.html>
More information about the Support-list
mailing list