[Elphel-support] more about my problems with the HDD

[Oleg]

Carlos,

Could you please send the output of:
1. "fdisk -l"
2. "hdparm -I /dev/hda"
3. "dmesg"

Could you recall what happened before camogm stopped recognizing the hdd ?

Regards,
Oleg

On 2 February 2012 16:36, Carlos Padial <palidoestudio2 at gmail.com> wrote:

> ok, i follow the wiki again and post you what happens
>
> Command (m for help): p
>
> Disk /dev/hda: 120.0 GB, 120034123776 bytes
> 255 heads, 63 sectors/track, 1824 cylinders, total 29305206 sectors
> Units = sectors of 1 * 4096 = 4096 bytes
>
>   Device Boot      Start         End      1K-Blocks  Id System
>
> Command (m for help): n
> Command action
>   e   extended
>   p   primary partition (1-4)
> p
> Partition number (1-4): 1
> First sector (1-29305205, default 1): Using default value 1
> Last sector or +size or +sizeM or +sizeK (1-29305205, default
> 29305205): Using default value 29305205
>
> Command (m for help): p
>
> Disk /dev/hda: 120.0 GB, 120034123776 bytes
> 255 heads, 63 sectors/track, 1824 cylinders, total 29305206 sectors
> Units = sectors of 1 * 4096 = 4096 bytes
>
>   Device Boot      Start         End      1K-Blocks  Id System
> /dev/hda1               1    29305205      117220820  83 Linux
>
> Command (m for help): w
> The partition table has been altered!
>
> Calling ioctl() to re-read partition table
> [root at Elphel353 /]1089# mkfs.ext2 /dev/hda1 -m0 -T largefile4
> mke2fs 1.38 (30-Jun-2005)
> mkfs.ext2: Could not determine if /dev/hda1 is mounted
>
> Could not determine filesystem size
>
> ?
>
> and if i do cat /proc/partitions again hda1 isn't there
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20120202/ab532b29/attachment-0002.html>