[Elphel-support] more about my problems with the HDD
Carlos Padial
palidoestudio2 at gmail.com
Thu Feb 2 15:36:43 PST 2012
ok, i follow the wiki again and post you what happens
Command (m for help): p
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 1824 cylinders, total 29305206 sectors
Units = sectors of 1 * 4096 = 4096 bytes
Device Boot Start End 1K-Blocks Id System
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First sector (1-29305205, default 1): Using default value 1
Last sector or +size or +sizeM or +sizeK (1-29305205, default
29305205): Using default value 29305205
Command (m for help): p
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 1824 cylinders, total 29305206 sectors
Units = sectors of 1 * 4096 = 4096 bytes
Device Boot Start End 1K-Blocks Id System
/dev/hda1 1 29305205 117220820 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table
[root at Elphel353 /]1089# mkfs.ext2 /dev/hda1 -m0 -T largefile4
mke2fs 1.38 (30-Jun-2005)
mkfs.ext2: Could not determine if /dev/hda1 is mounted
Could not determine filesystem size
?
and if i do cat /proc/partitions again hda1 isn't there
More information about the Support-list
mailing list