[Elphel-support] Odd Bug: Jpeg Sequence stops at 1909 frames on every attempt

[Sebastian Pichelhofer]

How big (filesize) is a single JPEG?

If you have a single 8GB CF card did you make sure the card isnt full after
recording 1909 frames?

Buffer overrun means that the data cannot be written to your record media
fast enough. If your datarate (jpeg quality, resolution, fps) is too high
that will happen shortly after starting the recording so the this behaviour
after a rather long recording is strange.


Regards Sebastian

On Thu, Mar 17, 2011 at 09:48, Bader AlKahtani <bader at kahtani.com> wrote:

> Hi Andrey,
>
> Many thanks for this.
>
> Please find the status report attached here.
>
> - The jpegs are getting recorded to the onboad SD card (8GB).
> - There haven't been any modifications to any of the software.
> - I am using a Garmin GPS hooked up on the USB.
>
> Some additional info, I tried to create a new sub-directory within the HDD
> and the error still exists. I also tried to keep the 1909 frames in the
> directory (without deleting them) and then tried to run the Disk recorder
> again to record another JPEG sequence and the buffer would overrun instantly
> - it seems like a max file count of 1909 is somewhere. The camera wont
> record again until I delete the JPEGS.
>
> Thanks a lot, Andrey.
>
> Bader
>
> On Thu, Mar 17, 2011 at 11:34 AM, Andrey Filippov <
> support-list at support.elphel.com> wrote:
>
>> Hello Bader,
>>
>> We need more information to try to reproduce this problem here. you may
>> download and attach file generated on the page
>> http://192.168.0.9/camerasetup/setup.php?page=report (link "<http://192.168.0.236/camerasetup/report.tar.gz>Download
>> Report as *.tar.gz" near the bottom) and provide additional information -
>> where is the data going to - recorded somewhere, going through the streamer
>> (then what is on the client side), etc. Anything else that yoiu think is
>> relevant to your case (i.e. are there any modifications to the camera
>> software).
>>
>> Andrey
>>
>> On Thu, Mar 17, 2011 at 2:13 AM, Bader AlKahtani <bader at kahtani.com>wrote:
>>
>>> Dear All,
>>>
>>> I hope your are well.
>>>
>>> I have been trying to run a JPEG Sequence and I keep getting a Buffer
>>> Overrun error everytime it reachs 1909 frames. I have tried playing with the
>>> resolution, jpeg quality, etc.. and I keep getting the same error. When
>>> monitoring the Buffer indicator, it seems to run fairly fine with just about
>>> 90 to 95% free but as soon as it reaches frame 1909, the bar starts to go
>>> down very quickly and gives me a Buffer Overrun error. I would really
>>> appreciate any help fixing this or maybe understanding why this is
>>> happening.
>>>
>>> Thanks
>>>
>>> --
>>>
>>> ________________________________*
>>> Bader K. AlKahtani*
>>>
>>> E-mail: Bader at Kahtani.com <bader at kahtani.com>
>>>
>>> +=========================================================+
>>>
>>> This message may contain confidential and/or privileged
>>>
>>> information.  If you are not the addressee or authorized to
>>>
>>> receive this for the addressee, you must not use, copy,
>>>
>>> disclose or take any action based on this message or any
>>>
>>> information herein.  If you have received this message in
>>>
>>> error, please advise the sender immediately by reply e-mail
>>>
>>> and delete this message.  Thank you for your cooperation.
>>>
>>> +=========================================================+
>>>
>>>
>>>
>>> _______________________________________________
>>> Support-list mailing list
>>> Support-list at support.elphel.com
>>>
>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>>
>>>
>>
>
>
> --
>
> ________________________________*
> Bader K. AlKahtani*
>
> E-mail: Bader at Kahtani.com <bader at kahtani.com>
>
> +=========================================================+
>
> This message may contain confidential and/or privileged
>
> information.  If you are not the addressee or authorized to
>
> receive this for the addressee, you must not use, copy,
>
> disclose or take any action based on this message or any
>
> information herein.  If you have received this message in
>
> error, please advise the sender immediately by reply e-mail
>
> and delete this message.  Thank you for your cooperation.
>
> +=========================================================+
>
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110317/6d0a325b/attachment-0002.html>