[Elphel-support] Odd Bug: Jpeg Sequence stops at 1909 frames on every attempt

Bader AlKahtani bader at kahtani.com
Thu Mar 17 01:48:34 PDT 2011


Hi Andrey,

Many thanks for this.

Please find the status report attached here.

- The jpegs are getting recorded to the onboad SD card (8GB).
- There haven't been any modifications to any of the software.
- I am using a Garmin GPS hooked up on the USB.

Some additional info, I tried to create a new sub-directory within the HDD
and the error still exists. I also tried to keep the 1909 frames in the
directory (without deleting them) and then tried to run the Disk recorder
again to record another JPEG sequence and the buffer would overrun instantly
- it seems like a max file count of 1909 is somewhere. The camera wont
record again until I delete the JPEGS.

Thanks a lot, Andrey.

Bader

On Thu, Mar 17, 2011 at 11:34 AM, Andrey Filippov <
support-list at support.elphel.com> wrote:

> Hello Bader,
>
> We need more information to try to reproduce this problem here. you may
> download and attach file generated on the page
> http://192.168.0.9/camerasetup/setup.php?page=report (link "<http://192.168.0.236/camerasetup/report.tar.gz>Download
> Report as *.tar.gz" near the bottom) and provide additional information -
> where is the data going to - recorded somewhere, going through the streamer
> (then what is on the client side), etc. Anything else that yoiu think is
> relevant to your case (i.e. are there any modifications to the camera
> software).
>
> Andrey
>
> On Thu, Mar 17, 2011 at 2:13 AM, Bader AlKahtani <bader at kahtani.com>wrote:
>
>> Dear All,
>>
>> I hope your are well.
>>
>> I have been trying to run a JPEG Sequence and I keep getting a Buffer
>> Overrun error everytime it reachs 1909 frames. I have tried playing with the
>> resolution, jpeg quality, etc.. and I keep getting the same error. When
>> monitoring the Buffer indicator, it seems to run fairly fine with just about
>> 90 to 95% free but as soon as it reaches frame 1909, the bar starts to go
>> down very quickly and gives me a Buffer Overrun error. I would really
>> appreciate any help fixing this or maybe understanding why this is
>> happening.
>>
>> Thanks
>>
>> --
>>
>> ________________________________*
>> Bader K. AlKahtani*
>>
>> E-mail: Bader at Kahtani.com <bader at kahtani.com>
>>
>> +=========================================================+
>>
>> This message may contain confidential and/or privileged
>>
>> information.  If you are not the addressee or authorized to
>>
>> receive this for the addressee, you must not use, copy,
>>
>> disclose or take any action based on this message or any
>>
>> information herein.  If you have received this message in
>>
>> error, please advise the sender immediately by reply e-mail
>>
>> and delete this message.  Thank you for your cooperation.
>>
>> +=========================================================+
>>
>>
>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>>
>


-- 

________________________________*
Bader K. AlKahtani*

E-mail: Bader at Kahtani.com <bader at kahtani.com>

+=========================================================+

This message may contain confidential and/or privileged

information.  If you are not the addressee or authorized to

receive this for the addressee, you must not use, copy,

disclose or take any action based on this message or any

information herein.  If you have received this message in

error, please advise the sender immediately by reply e-mail

and delete this message.  Thank you for your cooperation.

+=========================================================+
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110317/0b2045dc/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: report.tar.gz
Type: application/x-gzip
Size: 6850 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110317/0b2045dc/attachment.tgz>


More information about the Support-list mailing list