[Elphel-support] 10338 board

[Adam Gobi]

Thanks Andrey, looks good.  Also, I was just curious about why you have the
Dout[0] and Dout[1] pins separate from the rest of the sensor data output
pins, and named CNVSYNC and CNVCLK?

Thanks,
ag.

On 15 March 2011 12:32, Andrey Filippov <support-list at support.elphel.com>wrote:

> Adam, yes, the pinout is the same. The circuit diagram of the 10338D is on
> the page http://wiki.elphel.com/index.php?title=10338D , we just did not
> update photos there.
>
> Andrey
>
>
> On Mon, Mar 14, 2011 at 7:13 PM, Adam Gobi <adam.gobi at acheron.com.au>wrote:
>
>> Hi Andrey,
>>
>> Just looking at at the cable pinouts in 10338a.pdf, which appears to be
>> for revision 'A'.  Do they correspond with the 10338 revision 'D' board that
>> came with my 353 camera, including the 3.3V supply voltage requirement?
>>
>> Thanks,
>> ag.
>>
>>
>> --
>> Adam Gobi
>> Lead Engineer - Imaging
>> Acheron Project Pty Ltd
>> Leichhardt, NSW, Australia
>> e: gobi at acheron.com.au <adam.gobi at acheron.com.au>
>> v: +61 451 951 323
>> f: +61 2 9571 5575
>>
>>
>


-- 
Adam Gobi
Lead Engineer - Imaging
Acheron Project Pty Ltd
Leichhardt, NSW, Australia
e: gobi at acheron.com.au <adam.gobi at acheron.com.au>
v: +61 451 951 323
f: +61 2 9571 5575
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110315/d89dc585/attachment-0002.html>