[Elphel-support] Multcast

[jeff witz]

Hello,

I have an application where I make some computation in the picture in Real
Time, so for this purpose  I have to decompress the datas make operation on
it.

So there is no real trouble on this part,  but we need to be able to capture
the video too and it's specially in this part that we have trouble.
If the video flux is open then the camera is busy and we can't succeed in
recording the video.

As I'm not an expert in the network configuration, I don't know if the
multicast option can solve this issue, I see that multicast can send the
video flux on different destination but I don't know if it's possible to
have two video flux on the same IP adresse.

If it's possible, then I would like to have the explanation on how to use
the camera in multicast mode.

I see that there is adresses, port to be configured on the camera and on the
computer too in order to allow the multicast mode.
I really don't find how too parametrise this mode on the wiki so I would
really appreciate a complete explanation that helps to solve this real
issue.


Best Regards


-- 
Jean-François WITZ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110128/bcdd0f68/attachment-0002.html>