[Elphel-support] Elphel clock phase

[Douglass, Woodrow]

Oleg,

As soon as I replied, problem came back! attached is a test image.

-Woody

On Fri, Dec 9, 2011 at 8:50 AM, Douglass, Woodrow <wdouglass at redzone.com>wrote:

> Oleg,
>
> Sorry it has taken me so long to reply. The problem seems to have gone
> away for now. In my experience, it will come back soon, and when it does i
> will take a test image and send it. I'm sorry for the delay.
>
> The cable length we are using is 3 inches (about 75 mm). How long does the
> 353 support?
>
> -Woody
>
>
> On Wed, Dec 7, 2011 at 2:06 AM, Oleg <support-list at support.elphel.com>wrote:
>
>> Woodrow,
>>
>> What is the cable length? 30mm?
>> Could you please send an image from the sensor in test mode?
>> (You can enable test mode through http://cameraip/parsedit.php - find
>> TESTSENSOR parameter and set it to 0x10008
>> or
>> in telnet or ssh session type "fpcf -i2cw16 48a0 41" (switch back "fpcf
>> -i2cw16 48a0 0") where "48" is sensor's i2c address (shifted by 1 bit to
>> the right) and "a0" is the test mode register).
>>
>> Regards,
>> Oleg
>>
>> On 6 December 2011 12:24, Douglass, Woodrow <wdouglass at redzone.com>wrote:
>>
>>> Hello all,
>>>
>>> I am trying to adjust the clock phase on my elphel 353 camera. I am
>>> using the 7.1.5 firmware.
>>>
>>> I followed the instructions on this site:
>>> http://wiki.elphel.com/index.php?title=Adjusting_sensor_clock_phase
>>>
>>> It doesn't seem to make a difference, my picture is still purple. I have
>>> adjusted the 32 bits at 0x201, as well as using P_SENSOR_PHASE (at 74, per
>>> c313a.h). neither seem to affect my picture...
>>>
>>> Do you have any ideas of what i should try next?
>>>
>>> Thanks a lot,
>>> Woody
>>>
>>> _______________________________________________
>>> Support-list mailing list
>>> Support-list at support.elphel.com
>>>
>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20111209/b9fb3b16/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rearSnapshot-6.jpg
Type: image/jpeg
Size: 148158 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20111209/b9fb3b16/attachment.jpg>