[Elphel-support] Project File for Xilinx softwre - Elphel353

[Andrey Filippov]

Diana,

There still may be problems when you'll run P&R - with some seed values it
will fail completely, not just miss timing (and the "good" seed values may
change after any modifications to the code). With proprietary, closed-source
software tools it still remains a magic to me - make them run successfully.

So if it will not work for you - please post the error messages, we'll try
to suggest solutions.

For simulation (provided you installed Icarus Verilog and GTK Wave as
written on our Wiki) you may run
./x353_sim.sh
script from the  fpga/x353 subdirectory.

Andrey


On Tue, Aug 23, 2011 at 1:44 PM, Diana Carrigan
<DianaEJohnson at maxim-ic.com>wrote:

> Excellent! You guys rock!****
>
> ** **
>
> Diana****
>
> ** **
>
> *From:* elphel at gmail.com [mailto:elphel at gmail.com] *On Behalf Of *Andrey
> Filippov
> *Sent:* Tuesday, August 23, 2011 12:38 PM
> *To:* Diana Carrigan; support-list at support.elphel.com
> *Subject:* Re: [Elphel-support] Project File for Xilinx softwre -
> Elphel353****
>
> ** **
>
> Diana,
>
> Yes, sure - you can go to Project->Source Control->Import
> and select x353_import.tcl
> That will create Xilinx ISE  *.ise project file.
>
> Andrey
>
>
> ****
>
> On Tue, Aug 23, 2011 at 10:04 AM, Diana Carrigan <
> DianaEJohnson at maxim-ic.com> wrote:****
>
> Hello****
>
>  ****
>
> I was just wondering if you guys had  a  “project” file already setup for
> the FPGA in the Elphl353. I noticed the x353.ucf file has the
> Project:~/PCB/10353/REVB/10353B mentioned. Can this be downloaded from your
> website, or should I create a new project and just add all of the source
> files from the “fpga” directory?? ****
>
>  ****
>
> Diana****
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
> ****
>
> ** **
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110823/f55000c7/attachment-0002.html>