[Elphel-support] Issue with PPA

[Oleg K Dzhimiev]

Could you try to reinstall cris-dist (if the failed manual installation was
the last one then it might have cleaned everything without installing):

in the command line:

> sudo apt-get purge cris-dist
>
sudo apt-get install cris-dist
>

If you feel more comfortable with a graphical user interface this can be
done in the KPackageKit - launch it and find cris-dist.

Oleg

On 17 August 2011 16:34, Diana Carrigan <DianaEJohnson at maxim-ic.com> wrote:

> Hi Oleg,****
>
> ** **
>
> I did as you suggested; however, when running the install_elphel
> application, I got the following errors. This stuff is all new to me..so I
> really appreciate your help! Diana****
>
> ** **
>
> Verifying Axis Development Board R2_10 Arcive (devboard-R2_10.tar.gz in
> /home/dcarrigan/Downloads/distfiles) OK****
>
>
>
> ****
>
> ** **
>
> ---processing /home/dcarrigan/Downloads/distfiles/devboard-R2_10.tar.gz***
> *
>
> ---creating link to downloaded (or to be downloaded) files****
>
> ---copying Elphel files needed before ./configure****
>
> Running Axis configure****
>
> ** **
>
> `../elphel_preconfigure/configure-files/source-R1_12_0/functions' ->
> `./configure-files/source-R1_12_0/functions'****
>
> * Unpacking "distfiles/tools-build-R2_19_3.tar.gz"... done****
>
> * Unpacking
> "distfiles/configure-files-devboard-AC_common-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking
> "distfiles/configure-files-devboard-AC_general-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking
> "distfiles/configure-files-devboard-AC_hardware-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking
> "distfiles/configure-files-devboard-AC_libraries-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking
> "distfiles/configure-files-devboard-AC_network_application-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking
> "distfiles/configure-files-devboard-AC_network_protocol-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking
> "distfiles/configure-files-devboard-AC_web-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking
> "distfiles/configure-files-common-AC_common-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Select which product configuration to use.****
>
> *   1. elphel353  -  "Elphel (R) Model 353 Camera"****
>
> * Specify product [1-1] (default: 1):****
>
> * Selected product is "elphel353" To select another product run:
> "DEV_BOARD_PRODUCT=<product name> ./configure"****
>
> ** **
>
> * The SDK installation will soon start download and install the source
> packages required for the default configuration. If you would like to use a
> different configuration you can configure the SDK, hence avoid downloading
> and installing of unnecessary packages.****
>
> * Would you like to configure the SDK now [y/n] (default: n)? ****
>
>  * Unpacking
> "distfiles/configure-files-common-common-tag--devboard-R2_10-1.tar.gz"...
> done****
>
> * Unpacking "distfiles/modules-rules.build_modules-R1_1_1.tar.gz"... done*
> ***
>
> * Unpacking "distfiles/tools-iopasm-IR1_4-2.tar.gz"... done****
>
> * Unpacking "distfiles/modules-Rules.iop-R1_1_0.tar.gz"... done****
>
> * Error in function called from file: configure-files/common/common <=
> ./configure:****
>
>         compiler: Cannot not find compiler "crisv32-axis-linux-gnu-gcc"!**
> **
>
>         Try modifying your PATH.****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Oleg [mailto:andersonnotgood at gmail.com]
> *Sent:* Wednesday, August 17, 2011 3:28 PM
> *To:* Diana Carrigan
> *Cc:* Andrey Filippov
> *Subject:* Re: [Elphel-support] Issue with PPA****
>
> ** **
>
> Diana,
>
> I changed wiki instructions them too less confusing.
>
> The thing is after you do****
>
> sudo apt-get install cris-dist****
>
> the cris cross-compiler will be installed and you can proceed to "Build
> Elphel Software".
>
> Best regards,
> Oleg****
>
> On 17 August 2011 14:53, Diana Carrigan <DianaEJohnson at maxim-ic.com>
> wrote:****
>
> Hi, Andrey,****
>
>  ****
>
> Yes we are trying to develop software and compile our programs to run in
> the camera. I’m following the instructions in the document titled Elphel
> Software Kit for Ubuntu, found on the Wiki.****
>
>  ****
>
> My next big tackle seems to be compiling gcc-cris.****
>
>  ****
>
> I have sent the install-cris-tools_log to compiler-contact at axis.com, but
> they have not responded. I seeing the following message:****
>
>  ****
>
> **********buffer overflow detected**********: cris-axis-elf-ar terminiated
> ****
>
>  ****
>
>  ****
>
> And then the program aborts with an Error 2.****
>
>  ****
>
> If any of your experts have any ideas, please let know! I’ve attached the
> log.****
>
>  ****
>
> Thanks again ,****
>
>  ****
>
> Diana****
>
>  ****
>
>  ****
>
> *From:* elphel at gmail.com [mailto:elphel at gmail.com] *On Behalf Of *Andrey
> Filippov
> *Sent:* Wednesday, August 17, 2011 1:54 PM
> *To:* Diana Carrigan
> *Cc:* internal****
>
>
> *Subject:* Re: Issue with PPA****
>
>  ****
>
> Diana,
>
> I'll ask our team members who dealt with launchpad to investigate this
> issue. Meanwhile - maybe I can help you to achieve your goal differently?
> (as I wrote earlier - launchpad is new for us,  and I personally do not have
> much experience with it, used Sourceforge)  What are you trying to do -
> install development software to compile you programs to run in the camera?
> Or something different?
>
> Also - can you direct your technical questions to our mailing list? There
> are more people who can help there. You do not have to subscribe to the
> list, the first message will be delayed in the moderation queue until some
> of us add your email to the "white list", after that your messages will go
> through immediately.
>
> The list info page - http://www3.elphel.com/list
> Archive of the previous messages -
> http://www.mail-archive.com/support-list@support.elphel.com/
> You may email to support-list at support.elphel.com (first message will be
> held in moderation queue)
>
> Andrey
>
> ****
>
> On Wed, Aug 17, 2011 at 1:16 PM, Diana Carrigan <
> DianaEJohnson at maxim-ic.com> wrote:****
>
> Hi Andrey,****
>
>  ****
>
> I’m still seeing this issue. I think the issue is that the command  is
> adding  -name after ppa.****
>
>  ****
>
> W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-name/ubuntu/dists/natty/main/source/Sources
>  404  Not Found
>
> W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-name/ubuntu/dists/natty/main/binary-i386/Packages
>  404  Not Found****
>
>  ****
>
> Thanks,****
>
>  ****
>
> Diana****
>
> *From:* elphel at gmail.com [mailto:elphel at gmail.com] *On Behalf Of *Andrey
> Filippov
> *Sent:* Tuesday, August 16, 2011 3:23 PM
> *To:* Diana Carrigan
> *Cc:* Elphel
> *Subject:* Re: Issue with PPA****
>
>  ****
>
> Hello Diana,
>
> Can you try again, please? We also had problems with the Launchpad about an
> hour ago. If the error persists - we'll try to fix it. We just recently
> started to distribute software through the Launchpad, used only Sourceforge
> before.
>
> Andrey
>
> ****
>
> On Tue, Aug 16, 2011 at 3:08 PM, Diana Carrigan <
> diana.carrigan at maxim-ic.com> wrote:****
>
> I'm following the instructions for
>
> adding ppa:elphel/ppa to your system's Software Sources using the
> command:
>
> sudo add-apt-repository ppa:elphel/ppa
>
> The result being:
>
> Executing: gpg --ignore-time-conflict --no-options --no-default-keyring
> --secret-keyring /etc/apt/secring.gpg --trustdb-name
> /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring
> /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv
> 4236C2558A35918FCFD1DB956050780EC7A72F76
> gpg: requesting key C7A72F76 from hkp server keyserver.ubuntu.com
> gpg: key C7A72F76: "Launchpad PPA for elphel" not changed
> gpg: Total number processed: 1
> gpg:              unchanged: 1
>
>
> This appears to work properly; however when I try to update
>
> sudo apt-get update
>
> I get the following error:
>
> W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-
> name/ubuntu/dists/natty/main/source/Sources  404  Not Found
>
> W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-
> name/ubuntu/dists/natty/main/binary-i386/Packages  404  Not Found
>
> Your help would be appreciated.
>
> Diana
> --
> This message was sent from Launchpad by
> Diana Carrigan (https://launchpad.net/~diana-carrigan)
> using the "Contact this team's owner" link on the elphel team page
> (https://launchpad.net/~elphel).
> For more information see
> https://help.launchpad.net/YourAccount/ContactingPeople****
>
>  ****
>
>  ****
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
> ****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110817/ad677b49/attachment-0002.html>