[Elphel-support] elphel NC353L-12V Kit defect

[Andrey Filippov]

Viacheslav,

What camera is it? Does it have 10359 board? 10369 board? What software is
it running ?

As for "moving the camera" as the reason for breaking the image - it can be
one of the several reasons, you may narrow down the problem by making some
testing:

a) changing the image in front of the camera
 -  you can check it by putting a mirror in front of the camera lens and
rotating the mirror

b) shaking the camera itself (i.e. bad contact in the internal flex cable)
 - you can turn the network cable around and tape it to the camera, so when
you move the camera, nothing changes to the network connection

c) bad contact in the network cable
 - attach camera firmly to the table and move the network cable



Andrey

On Fri, Apr 15, 2011 at 10:44 AM, Viatcheslav Tretyakov <
viatcheslav.tretyakov at iais.fraunhofer.de> wrote:

> Hello,
>
> from the very beginning of the Kit's usage we've been facing image
> distortions. The defect, which at first we thought is software related,
> appears after several seconds of using the camera. The defect is
> reproducible by just moving the camera. I attached an image showing this
> image distortion effect. What could the problem and how to solve it?
>
> Regards,
> Viatcheslav
>
> --
> Viatcheslav Tretyakov
> Fraunhofer-Institut Intelligente Analyse- und Informationssysteme IAIS
> Schloss Birlinghoven, 53754 Sankt Augustin
> Telefon 02241 14-2771 (-2046 Sekr.)
> Fax 02241 14-2342
> viatcheslav.tretyakov at iais.fraunhofer.de
> http://www.iais.fraunhofer.de/
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110415/0c0e1729/attachment-0002.html>